Support
Email: hi@vilotv.com
ViloTV is a media player for Apple TV. It plays your own IPTV lists, SMB / WebDAV storage, Emby / Jellyfin servers and video URLs. The app does not provide any content.
The app is available in English and Simplified Chinese and follows your Apple TV’s language.
Getting started
- IPTV: on the home screen, select the “Add Source” card, enter an M3U or TXT channel list URL and press OK. You can also get there from Settings → Sources → Add Source. An IPTV source appears on the home grid; pick a channel by group, and press up/down to switch channels while watching.
- Play a URL: on the same “Add Source” screen, enter a video URL (mp4, m3u8, mkv, …) to play it directly.
- NAS (SMB): Settings → Sources → Add Network Storage, pick a server found on your network or type its IP, then enter an account (or use guest access).
- WebDAV: same as above, with an address starting with
http://orhttps://, e.g.http://192.168.1.5:5005. - Emby / Jellyfin: Settings → Sources → Add Media Server. Servers found on your network are listed at the top, or type an address (e.g.
192.168.1.10:8096orhttps://media.example.com; Emby’s/embypath is detected automatically), then sign in with your account. If Jellyfin Quick Connect is enabled, the TV shows a 6-digit code: enter it in Jellyfin on your phone or the web under Settings → Quick Connect. Watch progress syncs with your server. - When entering addresses or passwords, you can scan the QR code on screen and type on your phone.
FAQ
- Can’t connect to the NAS: make sure the Apple TV and the NAS are on the same network, and SMB (SMB2 / SMB3) or WebDAV is enabled on the NAS.
- WebDAV says the certificate is not trusted: self-signed certificates are not supported yet; use an
http://address on your local network. - WebDAV says Basic authentication is off: enable Basic authentication on the server.
- Can’t connect to Emby / Jellyfin: check the address and port (8096 by default); a server outside your home must be reachable from the Apple TV.
- Stutters over the internet: ViloTV currently plays the original files without server transcoding, so playback stalls when your connection is slower than the video’s bitrate. Transcoding will come in a later version.
- “Your sign-in has expired”: this happens when the device was removed on the server or the password changed. Go to Settings → Sources and choose “Sign In Again” for that server.
- A format won’t play: mp4 / mov / m3u8 use the system player; mkv, avi, ts and others use the built-in playback engine; ISO is not supported.
Questions or feedback: hi@vilotv.com